Carbon Fiber Charge Port Cover for Tesla Model 3/Y/S/X | Teslovix

Fits tightly over the charge flap. Clear coating is thick and durable, though edge beveling could be slightly smoother.

Automated charge port opening and closing works flawlessly with zero interference! The pre-applied double-sided tape bonded tightly. High-end carbon aesthetic.

Great contrast against white paint! Sticks down rock solid and clear coat has no bubbles or haze.

Carbon weave finish looks nice, but there's a tiny hairline gap along the top edge on my Model 3 charge door. Works fine with the automated motor though.

Elevates the exterior trim appearance nicely. Fits flush with minimal gap around the outer charge recess.

Looks like an expensive custom part. Simple press-on installation that holds firm at highway speeds.

Glossy pattern looks super clean and premium. Perfect alignment around the hinge curve, doesn't add noticeable weight or snag.

Adds a nice subtle touch to the rear quarter panel. Make sure to clean the surface thoroughly with alcohol wipes for maximum adhesion.

Keeps minor scratches off the painted charge door. Weave pattern looks great, just wish extra double-sided tape was included in the box.

Gloss coat is bright and reflective. Adhesive tape is strong, though I added a drop of adhesive promoter just to be safe.

Fits the curvature of the Model Y charge port trim perfectly. No gaps along the edges and zero interference with Supercharger plugs.

Matches my carbon spoiler and side mirror caps seamlessly. Precision laser cut edges and crystal clear UV-resistant epoxy coating.

Fits nicely over my Model Y charge door! Giving 4 stars only because you need to line it up very carefully on the first try before pressing down.

Looks like a factory performance option. Sensor detection for touch opening works 100% reliably!

Installed this carbon fiber charge port cover on my 2024 Tesla Model Y. Real glossy weave finish, ultra-lightweight, and fits over the motorized charge port door smoothly without sticking!

Zero issues with the auto-close sensor or motor drive. Took less than 2 minutes to clean with isopropyl alcohol and stick on!

Was worried it might weigh down the motorized mechanism, but it's super thin real carbon. Motor opens and closes effortlessly.

Extremely satisfied with the build quality. Weave pattern is consistent across the whole cover and alignment is spot on.

The weave pattern and finish are nice, but installation was tricky. If you tilt it even slightly off-center, it clips against the outer trim when the port opens automatically.

Matches my exterior carbon trim well. The auto door closing is a tiny bit slower due to slight weight, but operates smoothly without jamming.

Snug fitment and nice glossy sheen. Motorized port operation works reliably with no drag.

Looks custom and high-end. Zero interference when plugging in CCS or NACS chargers.

Gives the rear end a much sportier appearance. The 3M tape holds up through pressure car washes smoothly.

Fits contours accurately and looks high-end. Takes patience during installation to make sure spacing is completely even on all sides.

Gives a nice subtle sporty accent. Make sure to install in warm weather so the double-sided tape cures properly.

Carbon fiber material is real and looks great on my Model Y, but the pre-applied tape felt a bit thin. Had to re-apply my own heavy-duty 3M tape to get a completely flush bond.

Adds that OEM+ performance trim look without replacing the whole charge door assembly. Clear coat resists weathering and car washes with ease.

Carbon pattern looks legit and high quality. Zero clearance issues with standard charging handles or wall connectors.